However over time more and more 3rd party manufacturers have found ways to allow owners of the Mac Pro 6.1 Late 2013 to upgrade parts. One caveat is that it still remains far more costly than other alternatives either on an older Mac or a Windows PC. Upgrading Memory.

Your Mac Pro (Late 2013) has four upgradeable memory slots. These support up to 64GB of memory when all four slots are full using 1866 MHz DDR3 ECC RDIMMs.

Before upgrading memory

Make sure that the memory you plan to use is compatible with your computer. The Mac Pro supports both unbuffered UDIMMs and registered RDIMMs, but it is important not to mix these types of memory. DIMMs that are not properly installed or do not meet the system requirements may effect system performance or not be recognized.

Apple recommends that you use Apple-approved DIMMs. You shouldn't use DIMMs from older Mac Pro computers in your new Mac Pro. You can purchase Apple-branded memory by visiting an Apple Retail store or Apple Authorized Reseller.

Refer to Mac Pro (Late 2013): Memory specifications for additional information.

Removing and installing memory

Part 1: Remove the enclosure

1. Before you open your Mac Pro, shut it down by choosing Shut Down from the Apple () menu.
2. If the computer is warm to the touch, wait approximately 5-10 minutes for the computer to cool down.
3. Touch the metal enclosure on the outside of the Mac Pro to discharge any static electricity.

   Important: Always discharge static before you touch parts or install components inside your Mac Pro. To avoid generating static, don't move around the room until you finish installing the memory and slide the enclosure back onto the computer.

4. Unplug all the cables and the power cord from your Mac Pro. Do not attempt to install memory while it's plugged in.
5. Slide the enclosure latch to the right to unlock the enclosure.
6. Lift the enclosure straight up and off of the computer. Carefully set it aside.
7. The DIMM slots are now visible from the left and right side of the I/O panel.

Part 2: Removing existing DIMMs

Your Mac Pro shipped with DIMMs already installed in some or all of the DIMM slots. Before upgrading the memory, you may need to remove some or all of the DIMMs. Refer to the table below to determine how your Mac Pro is configured and to determine which DIMMs you need to remove and replace to maintain a recommended memory configuration. See the numbered steps following the table to locate specific DIMM slots.

Important: All DIMMs are 1866MHz DDR3 ECC. Do not mix UDIMMs and RDIMMs.

Remove DIMMs with these steps.

1. There are a total of four DIMM slots. Two are located to the left and two are located to the right of the Mac Pro I/O panel.
2. Access the DIMM slots via the RAM bay release lever (identified by a white triangle (A) at the top of each DIMM back). Push and lift upwards on the lever. The lever should move backwards and up, releasing the DIMM slots to swing out and making them easily accessible. Do not use excessive force on the release lever as you risk damaging the latch.
3. Locate the DIMM(s) you want to remove. The slots are numbered 1-4 (B). Using your thumb and index finger from each hand, gently grip the DIMM at each end and carefully remove the DIMM by pulling the DIMM straight out of the DIMM slot. Do not twist or force the DIMM out of the socket or damage may occur. Remove the outer DIMMs first to make the inner DIMMs easier to remove.
4. Place the removed DIMMs into an ESD (electrostatic discharge) protective bag.

Part 3: Installing DIMMs

Each DIMM (F) has a notch (E) that must line up with the key (D) inside of the DIMM slot (C). Note: The key/notch position is different on each side of the computer.

1. Locate the DIMM slot closest to the interior of the computer and confirm that no DIMM is there.
2. If available, use canned air to blow dust and other contaminants out of the DIMM slot. Note: Keep the can vertical to avoid spraying propellants onto the DIMM slots.
3. Gently hold the DIMM ends and insert it into the slot. Ensure horizontal alignment of the DIMM prior to applying any force.
4. Insert the DIMM at the angle determined by the open DIMM mechanism.
5. Insert gently until bottom edge of DIMM is touching the gold contacts, then apply more force to fully seat the DIMM.
   • Do NOT force the DIMM. If the DIMM doesn't insert, verify that the key (D) and notch (E) are aligned.
   • Do NOT rock the DIMM into the seated position.
   • Do NOT insert DIMMs while the DIMM mechanism is in the locked position.
   • Do NOT bend or twist the DIMM during insertion.
6. Press the RAM bay back into place after installing all DIMMs.

Part 4: Reinstall the enclosure

1. Carefully lower the enclosure over the Mac Pro being careful not to touch any of the circuit boards.
2. You may need to gently push down on the enclosure in order for it to seat fully.
3. Once the enclosure is fully seated, slide the enclosure latch to the left to lock it.
4. If the enclosure latch does not move all of the way to the left, verify that the enclosure is properly installed and fully seated, then try again.
5. You are now ready to connect a power cord, display, and other peripherals. Power on your Mac Pro and verify that your system is operating properly.

Memory verification

To be sure that you correctly installed the memory and that it's recognized by the Mac Pro, follow these steps.

1. From the Apple () menu, choose About this Mac.
2. Click More Info. A window with general information about your Mac will appear.
3. Click the System Report button to bring up more detailed information on the memory installed in the computer.
4. Click the Memory tab.
5. Check to be sure that the memory you installed is listed and appears as you expect it to. In the image below, the DIMMs are annotated (DIMM1, DIMM2, DIMM3, DIMM4) so you can identify the corresponding DIMMs which are numbered 1, 2, 3, and 4 at the bottom of the DIMM mechanism.
6. If one or more memory slots that you installed memory in are listed as empty, shut down your computer and follow the steps again to verify that the memory is correctly installed. Refer to Mac Pro (Late 2013) Memory Specifications to confirm that the memory meets the requirements for your Mac Pro.
7. If you continue to have issues with memory you installed, Contact Apple Support for information about the support options available to you.

Other World Computing announced today that it has expanded its memory upgrade options for the Apple 2013 Mac Pro. After being the first to provide after market 32GB and 64GB for the new 2013 Mac Pro in December, OWC now offers additional module and kit options to provide customers with greater choice, savings, and flexibility in their memory configuration choices.

MAPublisher 5.0 is the latest release of this powerful suite of plug-ins for Adobe Illustrator and Macromedia FreeHand that bridges the gap between Geographic Information Systems (GIS) and high-end graphic design for high quality creation, high resolution printing and electronic publishing of maps. Mapublisher 9 5 keygen for mac pro. Mapublisher 9 5 Keygen Crack. MAPublisher allows you to produce the best quality maps possible in the most efficient. WebSnapperPro 1.2.9 Cracked Serial For Mac OS X Free Download. Mapublisher 9 crack RedmondMag.com - The Independent Voice of the Microsoft IT Community. Uni optimizer. Cricket scoring app for windows 8 IT needs to patch. MAPublisher is available on Mac and Windows and is compatible with the latest Adobe Illustrator release, ensuring the latest graphic design tools are at your disposal. Licenses available as both fixed single and floating. Floating licenses are cost effective for any commercial, academic, or non-profit organization. See compatibility. Top 4 Download periodically updates software information of MAPublisher 9.5.4 full version from the publisher, but some information may be slightly out-of-date. Using warez version, crack, warez passwords, patches, serial numbers, registration codes, key generator, pirate key, keymaker or keygen for MAPublisher 9.5.4 license key is illegal and prevent future development of MAPublisher 9.5.4. Mapublisher 9 5 Keygen 20 February 24, 2018 cfe036a44b MAPublisher 9.8.1 - MAC - nkristoff - Chomikuj.plMAPublisher 9.8.1 MAC pliki uytkownika nkristoff przechowywane w serwisie Chomikuj.pl MAPublisher 9.8.

OWC Testing Reveals More Memory Trumps Matched Memory In New Mac Pro

The new 2013 Mac Pro is available with either 12GB (4GB x 3) or 16GB (4GB x 4) base memory configurations from the factory. Best memory performance is obtained with configurations of four (4) matched modules of Apple specification, including OWC 32GB (8GB x 4) and OWC 64GB (16GB x 4) kits. In real-world use, however, having more memory for demanding applications enables the greatest performance benefits and even adding an 8GB module to achieve 20GB of total system memory (4GB x 3 + 8GB x1) can have a profound impact. Actual testing of various memory configurations is available on the OWC Blog: blog.macsales.com/22745-mix-and-match-more-memory-faster-mac-pro-2

“For best results, sets of four matched modules should be utilized,” said Larry O’Connor, OWC Founder and CEO. “If, however, you’re on a budget, increasing the total memory will always provide the most significant performance bang for the buck. Upgrading to 32GB with our 16GB x 2 also makes it more economical to later go to 48GB or 64GB without having to replace all four modules, as is the case with an 8GB x 4 Kit.”

Pricing and Availability of Popular Memory Options for All Apple 2013 Mac Pro 3.7GHz Quad-core,3.5GHz 6-Core, 3.0GHz 8-Core, and 2.7GHz 12-Core Models Currently Available:

• OWC 8GB Module $119.99: Savings of up to 40% (save up to $80) vs. factory*
• OWC 32GB Kit (16GB x 2) $437.99: Savings of up to 45% (save up to $362) vs. factory*
• OWC 48GB Kit (16GB x 3) $649.00: Savings of up to 46% (save up to $551) vs. factory*
• OWC 64GB Kit (16GB x 4) $849.00: Savings of up to 47% (save up to $751) vs. factory*
• OWC options for adding 4GB and up to 64GB to Mac Pro 2013 are now available from $74.99

*Savings compared vs. Apple Store memory module costs.

Note: 16GB modules for Mac Pro 2013 are Registered and cannot be mixed with standard 4GB and 8GB modules. However, 4GB and 8GB modules from OWC and Apple can be mixed and matched.

To assist both existing and new model Mac Pro owners inselecting the correct memory upgrade for any Mac Pro model, OWC has created an easy to use guide that shows the correct memory type and options specific to each of the different Mac Pro models. To view all available options and/or order OWC Memory Upgrade Kits for Mac Pro 2006 to 2013 models, visit: eshop.macsales.com/shop/memory/Mac-Pro-Memory

Since the first Mac Pro in 2006, OWC has been the first to market and leading after-market provider of memory for the every Mac Pro Apple has introduced. All OWC Memory upgrade kits for the Apple Mac Pro 2013 consist of true 1866MHz modules (full-rated components, no overclocking) that are tested and certified to meet, if not exceed, Apple Design Specifications. Fully RoHS- and JEDEC-compliant, they are designed to provide the full benefit this latest Mac Pro can garner from its high-performance memory bus. Like all OWC Memory Upgrades, the Mac Pro Upgrade Kits are backed with a Money Back Guarantee and OWC’s Lifetime Advance Replacement Warranty.

More Savings Available with OWC Rebate Program

After upgrading with an OWC Apple Mac Pro 2013 Memory Option, customers can save even more with OWC’s Trade-in Rebate for the original factory memory. Receive up to $225 for Apple factory modules removed from any Mac Pro 2013 model. For complete details, see: eshop.macsales.com/tech_center/support/rebates/memory.cfm

Free ‘Do-It-Yourself’ Videos for Easy Installation

A spudger tool is included with all OWC Mac Pro Upgrade kits, and an online installation video rated “Easy” is also available at: eshop.macsales.com/installvideos/macpro_2013_mem/ . For installation videos on a wide variety of upgrade products for Mac models, both current and legacy, visit: eshop.macsales.com/installvideos/.

OWC MaxRAM® Memory Certification Program Provides Comprehensive Testing and Certification

By maintaining not one, but two labs with multiple Apple Mac models that encompass nearly every Apple Mac model ever made, the OWC MaxRAM Memory Certification Program determines the maximum amount of memory that can be installed in a Mac, backed by OWC’s Lifetime Advance Replacement Warranty and Money Back Guarantee.

OWC – The Long-term, Trusted Name for Mac Memory

OWC memory upgrades are available from16MB to 128GB for nearly every current and past Apple notebook and desktop computer manufactured during the past twenty years, including Mac Pro Xeon, MacBook, MacBook Pro, iMac, Power Mac, Xserve, iBook, and PowerBook computers. The full OWC Memory line as well as a compatibility guide which directs customers to the correct upgrades for each specific Apple model, can be found online at: eshop.macsales.com/shop/apple/memory/

Be Sociable, Share This!